Key Word :
   Type :
 
  Thermal Resistance [K/W] :
  Products Philips Fortimo LED Cooling

The third Philips Fortimo LED SLM generation is the ideal solution for spot lighting fixtures and highly efficient compact down light luminaires. It is specifically designed for the retail market showcasing retail merchandise in bright and vivid light. This generation is equipped with new Chip-On-Board (COB) LED technology. This technology enables the creation of the most efficient point source Philips LED system available.

MechaTronix developed an extensive range of passive pin fin and star LED coolers as well as active cooling solutions which are thermally validated for the Philips Fortimo SLM and DLM LED modules under various driving currents and ambient temperatures.

Where in the past many shop lighting applications where designed around active LED coolers once nearing in on the 3.000 lumen range, we can guarantee passive off-the-shelf solutions all the way up to 4.500 lumen. This not only eliminates life time risks of the active component, but makes that luminaire designers can use a simple constant current LED driver instead of the much more expensive drivers with dual output for the LED module and the active cooler.

When you need asistance on your design just let us know. Besides the enormous pile of thermal validation data we have in house we can also run CFD models to assure you the results you will get at the end.

Thermal interface pads can as well be pre-applied.

 
  • Overview
  • Datasheets
  • Demo Movies

1  2  3  

LPF4768-ZHP Philips Fortimo Pin Fin LED Cooler ø47mm

Pin Fin LED cooler for Philips Fortimo LED modules
Luminaire cooling performance 600 - 2,200 lumen
Diameter 47mm - Height 68mm - Thermal resistance Rth 3.9°C/W
Validated thermal design for Philips Fortimo SLM Gen3 / Gen4 LED modules
Direct mounting on the LED cooler
Cable guidance side slot

Products include →
Datasheets

Please check Philips Fortimo LED cooler overview for all available LED cooler modules and COB's
Online orders possible for LPF4768-ZHP both black & clear anodized, available from stock without MOQ
Further mounting options and mechanical adaptations available with MOQ 1Kpcs
See contact us for your nearest distributor

Philips Fortimo Pin Fin LED Cooler
Diameter 47mm - Height 68mm
Thermal resistance Rth 3.9°C/W
Total cooling surface 31929mm²
Volume 31125mm³ - Weight 84g
RoHs compliant
68mm
Height:

Black / Clear
Anodise Colors:
Datasheets LPF4768-ZHP Philips Fortimo Pin Fin LED Cooler ø47mm

LPF6050-ZHC Philips Fortimo Pin Fin LED Cooler ø60mm

Pin Fin LED cooler for Philips Fortimo LED modules
Luminaire cooling performance 500 - 1.700 lumen
Diameter 60mm - Height 50mm - Thermal resistance Rth 4.0°C/W
Validated thermal design for Philips Fortimo SLM Gen3 / Gen4 LED modules
Direct mounting on the LED cooler
Cable guidance hole

Products include →
Datasheets

Please check Philips Fortimo LED cooler overview for all available LED cooler modules and COB's
Online orders possible for LPF6050-ZHC black anodized, available from stock without MOQ
Clear anodized and further mounting options available with MOQ 1Kpcs
See contact us for your nearest distributor

Philips Fortimo Pin Fin LED Cooler
Diameter 60mm - Height 50mm
Thermal resistance Rth 4.0°C/W
Total cooling surface 43447mm²
Volume 41094mm³ - Weight 110.95g
RoHs compliant
50mm
Height:

Black / Clear
Anodise Colors:
Datasheets LPF6050-ZHC Philips Fortimo Pin Fin LED Cooler ø60mm

LPF6768-ZHP Philips Fortimo Pin Fin LED Cooler ø67mm

Pin Fin LED cooler for Philips Fortimo LED modules
Luminaire cooling performance 1,100 - 3,300 lumen
Diameter 67mm - Height 68mm - Thermal resistance Rth 2.1°C/W
Validated thermal design for Philips Fortimo SLM Gen3 / Gen4 LED modules
Direct mounting on the LED cooler
Cable guidance side slot

Products include →
Datasheets

Please check Philips Fortimo LED cooler overview for all available LED cooler modules and COB's
Online orders possible for LPF6768-ZHP both black & clear anodized, available from stock without MOQ
Further mounting options and mechanical adaptations available with MOQ 1Kpcs
See contact us for your nearest distributor

Philips Fortimo Pin Fin LED Cooler
Diameter 67mm - Height 68mm
Thermal resistance Rth 2.1°C/W
Total cooling surface 56108mm²
Volume 63378mm³ - Weight 171g
RoHs compliant
68mm
Height:

Black / Clear
Anodise Colors:
Datasheets LPF6768-ZHP Philips Fortimo Pin Fin LED Cooler ø67mm

LPF8050-ZHC Philips Fortimo Pin Fin LED Cooler ø80mm

Pin Fin LED cooler for Philips Fortimo LED modules
Luminaire cooling performance 1.000 - 2.800 lumen
Diameter 80mm - Height 50mm - Thermal resistance Rth 2.34°C/W
Validated thermal design for Philips Fortimo SLM Gen3 / Gen4 LED modules
Direct mounting on the LED cooler
Cable guidance hole

Products include →
Datasheets

Please check Philips Fortimo LED cooler overview for all available LED cooler modules and COB's
Online orders possible for LPF8050-ZHC black anodized, available from stock without MOQ
Clear anodized and further mounting options available with MOQ 1Kpcs
See contact us for your nearest distributor

Philips Fortimo Pin Fin LED Cooler
Diameter 80mm - Height 50mm
Thermal resistance Rth 2.34°C/W
Total cooling surface 74885mm²
Volume 72128mm³ - Weight 195g
RoHs compliant
50mm
Height:

Black / Clear
Anodise Colors:
Datasheets LPF8050-ZHC Philips Fortimo Pin Fin LED Cooler ø80mm

LPF8668-ZHC Philips Fortimo Pin Fin LED Cooler ø86mm

Pin Fin LED cooler for Philips Fortimo LED modules
Luminaire cooling performance 1,500 - 4,600 lumen
Diameter 86mm - Height 68mm - Thermal resistance Rth 1.46°C/W
Validated thermal design for Philips Fortimo SLM Gen3 / Gen4 LED modules
Direct mounting on the LED cooler
Cable guidance side slot

Products include →
Datasheets

Please check Philips Fortimo LED cooler overview for all available LED cooler modules and COB's
Online orders possible for LPF8668-ZHC both black & clear anodized, available from stock without MOQ
Further mounting options and mechanical adaptations available with MOQ 1Kpcs
See contact us for your nearest distributor

Philips Fortimo Pin Fin LED Cooler
Diameter 86mm - Height 68mm
Thermal resistance Rth 1.46°C/W
Total cooling surface 68849mm²
Volume 92981mm³ - Weight 251g
RoHs compliant
86mm
Height:

Black / Clear
Anodise Colors:
Datasheets LPF8668-ZHC Philips Fortimo Pin Fin LED Cooler ø86mm

LPF11180-ZHE Philips Fortimo Pin Fin LED Cooler ø111mm

Pin Fin LED cooler for Philips Fortimo LED modules
Luminaire cooling performance 2000 - 4,500 lumen
Diameter 111mm - Height 80mm - Thermal resistance Rth 1.07°C/W
Validated thermal design for Philips Fortimo SLM Gen3 / Gen4 LED modules
Direct mounting on the LED cooler
Cable guidance hole

Products include →
Datasheets

Please check Philips Fortimo LED cooler overview for all available LED cooler modules and COB's
Online orders possible for LPF11180-ZHE both black & clear anodized, available from stock without MOQ
Further mounting options and mechanical adaptations available with MOQ 1Kpcs
See contact us for your nearest distributor

Philips Fortimo Pin Fin LED Cooler
Diameter 111mm - Height 80mm
Thermal resistance Rth 1.07°C/W
Total cooling surface 115637mm²
Volume 210075mm³ - Weight 567g
RoHs compliant
10mm
Base Thickness:

Black / Clear
Anodise Colors:
Datasheets LPF11180-ZHE Philips Fortimo Pin Fin LED Cooler ø111mm

ModuLED Pico 4750 Philips Fortimo Star LED Cooler ø47mm

Modular LED cooler for Philips Fortimo LED modules
Luminaire cooling performance 400 to 1,400 lumen
Diameter 47mm - Height 50mm - Thermal resistance Rth 5.3°C/W
Validated thermal design for Philips Lighting Fortimo SLM GEN3 / GEN4 LED modules
Direct mounting on the LED cooler

Products include →
Datasheets

Please check Philips Fortimo LED cooler overview for all available LED cooler modules and COB's
Online orders possible for ModuLED Pico 4750 both black & clear anodized, available from stock without MOQ
Further mounting options and mechanical adaptations available with MOQ 1Kpcs
See contact us for your nearest distributor

Philips Fortimo Modular Passive LED Cooler
Diameter 47mm - Height 50mm
Thermal resistance Rth 5.3°C/W
Total cooling surface 35707mm²
Volume 48779mm³ - Weight 131g
RoHs compliant
50mm
Height:

Black / Clear
Anodise Colors:
Datasheets ModuLED Pico 4750 Philips Fortimo Star LED Cooler ø47mm

ModuLED Pico 4780 Philips Fortimo Star LED Cooler ø47mm

Modular LED cooler for Philips Fortimo LED modules
Luminaire cooling performance 600 to 1,800 lumen
Diameter 47mm - Height 80mm - Thermal resistance Rth 4.2°C/W
Validated thermal design for Philips Lighting Fortimo SLM GEN3 / GEN4 LED modules
Direct mounting on the LED cooler

Products include →
Datasheets

Please check Philips Fortimo LED cooler overview for all available LED cooler modules and COB's
Online orders possible for ModuLED Pico 4780 both black & clear anodized, available from stock without MOQ
Further mounting options and mechanical adaptations available with MOQ 1Kpcs
See contact us for your nearest distributor

Philips Fortimo Modular Passive LED Cooler
Diameter 47mm - Height 80mm
Thermal resistance Rth 4.2°C/W
Total cooling surface 55960mm²
Volume 78046mm³ - Weight 210g
RoHs compliant
80mm
Height:

Black / Clear
Anodise Colors:
Datasheets ModuLED Pico 4780 Philips Fortimo Star LED Cooler ø47mm
1  2  3  
 
No.818, Dashun 2nd Rd., Sanmin Dist., Kaohsiung City 80787, Taiwan    Tel : +886-7-381-5892    Fax: +886-7-383-9293
E-mail : led@MechaTronix-asia.com    Website : www.led-heatsink.com